Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Graphtec MARK 12: (1 year) CAL VER /5500
DATE:                  22-Sep-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.5 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       8
NUMBER OF LINES:       84
=============================================================================
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  DISP         {Procedure not formally tested with UUT.}
  1.001  DISP         {See procedure README file.}
  1.002  ASK-                        P                            F        V
  1.003  ASK+           K                              X
  1.004  HEAD         PRELIMINARY INSTRUCTIONS
  1.005  DISP         Connect UUT to AC power and turn unit ON.
  1.005  DISP
  1.005  DISP         Warm-up time: 30min - REQUIRED
  1.005  DISP         Temperature: 23 +/-2 degC
  1.005  DISP         Humidity: 55 +/-10%
  1.006  DISP         [32]                WARNING
  1.006  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.006  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.006  DISP         personnel fail to observe safety precautions.
  1.007  DISP         This procedure was written for
  1.007  DISP         INPUT BOARD TYPE: 71702-745.
  1.007  DISP
  1.007  DISP         NOTE only minor changes necessary for other boards.
  1.008  MEM2         =CHANNEL 1
  1.009  CALL         Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
  1.010  JMP          2.001
  1.011  EVAL   dummy
  2.001  RSLT         =
  2.002  MEM2         =CHANNEL 2
  2.003  CALL         Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
  2.004  JMP          3.001
  2.005  EVAL   dummy
  3.001  RSLT         =
  3.002  MEM2         =CHANNEL 3
  3.003  CALL         Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
  3.004  JMP          4.001
  3.005  EVAL   dummy
  4.001  RSLT         =
  4.002  MEM2         =CHANNEL 4
  4.003  CALL         Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
  4.004  JMP          5.001
  4.005  EVAL   dummy
  5.001  RSLT         =
  5.002  MEM2         =CHANNEL 5
  5.003  CALL         Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
  5.004  JMP          6.001
  5.005  EVAL   dummy
  6.001  RSLT         =
  6.002  MEM2         =CHANNEL 6
  6.003  CALL         Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
  6.004  JMP          7.001
  6.005  EVAL   dummy
  7.001  RSLT         =
  7.002  MEM2         =CHANNEL 7
  7.003  CALL         Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
  7.004  JMP          8.001
  7.005  EVAL   dummy
  8.001  RSLT         =
  8.002  MEM2         =CHANNEL 8
  8.003  CALL         Sub Graphtec MARK 12 Chan. Tests (1 year) CAL VER /5500
  8.004  END